SCS-Delta 400 is the fastest and most powerful ECU in its class, while retaining the compact form of its predecessor and exceptional value. Software configurable setup allows for CAN-BUS integration, VVT control, coil on plug ignition and up to 6 injector outputs.
High performance 32bite 200z335 coreprocessor @ 80MHz-Power Architecture BookE
Dedicated Time Processor Unit for core independent angle based signal processing
1.5Mb FLASH memory
6 x Injector outputs
4 x Ignition outputs software selected Logic level or IGBT Power
5 x Low side outputs 3A
3 x Linear analogue inputs
3 x NTC analogue input
2 x Lambda analogue inputs
1 x CAN 2.0B channels
1 x 500mA sensor supply outputs
Internal Barometric Pressure Sensor
3 x VR/Hall effect digital inputs software selected
All outputs protected against shortcircuit with feedback for short/open circuit diagnosis
35 way AMP Seal connector and bespoke ABS enclosure suitable for engine bay mounting
Made in the UK using 100% Surface Mount Technology
6-18V operating voltage
Internal monitoring of battery voltage, reference supply voltages and ECU temperature
Size: 100x160x35mm Weight:228g
Software Specification
Intuitive Bespoke Real Time Calibration Tool using micro USB CAN Interface Dongle
Up to 4Cylinders Direct Ignition and Sequential Injection
Up to 6Cylinders Wasted Spark and Sequential Injection
Up to 8Cylinders Wasted Spark and Batched Injection
Engine Logbook Recording Vital Engine Statistics
Wide Range of Original Equipment Trigger Patterns Supported
32 x 32 Variable Breakpoint Fuel and Ignition Main Maps
Alpha-N, SpeedDensity or Hybrid Alpha-N with MAP Correction Load Input
Maximum Engine Speed Break points up to 16,500rpm
Individual Cylinder Trim Maps for both Fuel and Ignition
Stereo Closed Loop Fuelling Control (Narrowband or Wideband) with Lambda Auto Mapping
User Configurable Hard and Soft Engine Speed Limiters as a function of Coolant Temperature
User Selectable OEM CAN Output to drive Original Equipment Dashboards and EPAS systems
Comprehensive Transient Fuelling Control
Closed Loop Boost Control with Overboost Fuel Cut Protection and Gear offsets
Comprehensive Environmental Corrections for Fuelling and Ignition
Cranking and Cold Start Enrichment Maps
Overrun Fuel Cut-off Strategy
Closed Loop Idle Speed Control for both Ignition and Idle Air Bypass Valve
Variable Camshaft Timing Control for up to 2 Camshafts
All Sensor Inputs are User Configurable
VTEC Cam Switching Control
Configurable Shift Lamp Control
Comprehensive Launch Control , Switched or FullyAutomatic
Pit Lane Speed Limiter
Closed or open loop gear cut switch or direct GCU Input, full Ignition Cut or Ignition Retard
4 Cylinder Staged Injection
Shipping costs
Pick up from local Finnish post office
0,00 €
DHL Express Suomi
15,00 €
EMS Express Worldwide
39,00 €
Parcel will be delivered to receivers home adress, after possible customs handling.
International Express Mail service, handled by local mail companies around the world.
Your order can be shipped with these shipping methods.
We sell products worldwide to private persons and businesses. Prices shown in shop is normally included by Finnish VAT 24% (Exception: some unique custom products, when it is separately mentioned). Right for price changes and delivery costs/methods are reserved for us.
Price in shop is always based in EUR (€). The shop will convert the price to desired currency, but the price in receipt/invoice is always EUR. Depending on payment method, currency may, and will vary due to provider´s own policies. In some cases, real amount can be slight bigger. That is because provider, not us (for example Paypal). We are not responsible from these fees/currency conversions.
NOTE!
Customers outside EU: You don´t have to pay VAT, price is corrected at checkout procedure, when you have given your country!
Also with valid European union VAT-number, companies can purchase without VAT as VAT 0 % (Intra-Community transport). This is enabled automatically at checkout process
Ordering
Ordering is processed by clicking product(s) to shopping cart and making payment process in given methods (Klarna Checkout, Paypal). All personal information is considered confidential and it is only used in processing the order and contacting consernig the order(s), unless it is separately mentioned.
When placing an order, it is then assumed that you have read and understood all terms and conditions and you are accepting those current terms.
Payments and payment methods
Payment methods are:
- Paypal (Credit- and debitcards and Paybal balance)
- Postal office prepayment (only in Finland)
- Klarna Checkout, which includes: (only in Finland, Sweden, Norway, Germany)
*Invoice
*Partial payment
*Card payment
*Internet Bank transfer.
By giving your information at checkout, you accept Klarna AB:s (Klarna AB, Sveavägen 46, 111 34 Stockholm) terms and conditions. By pressing "Buy now" -buttona, you will accept also Protoparts terms and conditions.
Order- and payment confirmation
When we have received an order, we immediately send confirmation to you, which includes your order information. ALWAYS CHECK content of order confirmation and please make immediate contact to us, if you find something is wrong or you have questions. Save the confirmation if you come in need to contact us. When contacting, pleas tell us your Name, customer number (if available) and number of order.And when receiving delivery, please make sure that contents match with confirmation and receipt/invoice.
Contact information:
Protoparts Oy Paypal: info@protoparts.fi VAT: FI28405755 Yrittäjäntie 7, 60800 Ilmajoki
Delivery costs includes postage and packing expenses. Actual costs is found when you place and order and choose your preferred payment- and delivery method. Available methods are depending on product, weight, measures and receivers country. Shop only shows methods, which are possible for that current order.
Our current logistic partners are DHL and Finnish post "Posti" (International delivery also).
Maximum single package weight is 30kgs, after that it is special Multi package delivery and we contact for delivery price.
Customers outside European Union and customs declaration:
If your delivery address is outside of EU, you may have to pay import duties and taxes, which are assigned once a shipment reaches your country by customs. You must meet any additional charges for customs clearance. Please note customs policies vary widely from country to country. We recommend you contact your local customs office for further information. International shipments may be subject to cross-border inspections by customs authorities. We are not responsible for ANY customs declaration fees.
Customer outside EU can order Tax Free from us, Checkout will automatically reduce Finnish VAT off, so price will be 24% cheaper, than price, which includes VAT.
About reducing declared value to reduce customs fees:
Note that we cannot change the value of shipments in order to reduce customs duties. The modification of commercial invoice is against the law and we kindly ask understanding: Please do not ask us to reduce shipping value.We will not do it.
Delivery times
Our most common delivery time inside Finland is approx 2-3 days from order, inside Europe about a week, depending on Postal service. Mainly, stocked and ready items will be sent as soon as possible, about 24h from order. Unusual delivery time is mentioned in product specs and if there is some delay from some reason, we will contact you via Email.
Please note: Ready Megasquirt ECUs and wiring harnesses almost every time needs some customization, so these are delivered usually within a week from order. Our staff will contact in this case.
Returns
Right of withdrawal
You have the right to cancel this agreement within 14 days without giving any reason. The withdrawal period ends within 14 days starting from the day you received the last shipment, or in the case of downloadable products, from the moment you received the order.
In order to exercise the right of withdrawal, you must notify us of your decision to cancel the agreement in an unambiguous way (for example, by mail or by email). You can also use our printable return form, but its use is not mandatory.
To comply with the deadline for withdrawal, it is sufficient that you submit your notice of cancellation before the end of the withdrawal period.
Effects of withdrawal
If you withdraw from this contract, we shall reimburse to you all payments received from you, including the costs of delivery (with the exception of the supplementary costs resulting from your choice of a type of delivery other than the least expensive type of standard delivery offered by us), without undue delay and in any event not later than 14 days from the day on which we are informed about your decision to withdraw from this contract. We will carry out such reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.
You must return the goods without delay and no later than 14 days after informing us about your decision to withdraw from the contract. The deadline is met if you send back the goods before the period of 14 days has expired.
You are only responsible for the kind of value decrease of the goods that did not result from treatment that is required for determining the nature, properties and functionality of the goods.
Unpaid or undelivered package
Unpaying or no picking up delivery is NOT considered as legal return or cancellation.
In this case we hold the right to ask you for payment for delivery cost IN BOTH DIRECTIONS. Invoice is sent to receiver.
Problems in delivery
If delivery is lost or damaged in transit or somehow it is not what you expected, please make contact ASAP. In that case, contact MUST be made within 14 days from receiving it. Contact must be made with email or letter. Attach some photos of the damaged products to the mail.
If the package is clearly damaged in transit, receiver must make an reservation/claim to transit company you have chosen to deliver, BEFORE receiving it.