AEM

AEM

  • AEM
  • AEM
  • AEM
  • AEM
  • AEM

AEM

Price 499,00 €
(Incl. VAT 24%)

AEM's Multi Input controller design enables users to install Water/Methanol Injection on high compression naturally aspirated vehicles (NA) via the MAF/IDC settings. The Multi-Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF. The Multi-Input Controller is available with a 1.15-gallon tank (PN 30-3350), five-gallon tank (PN 30-3351) and in a tank-less kit (PN30-3352).

Find out more on AEM Website:

https://www.aemelectronics.com...


Preferred delivery time:

Choose, if you wish normal, or express delivery (+25€ extra)

Robust, Easy to Use Controller Designs
The new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Multi-Input controller for NA high compression engines has an easy-to-remove plug covering the programming dipswitches and a programming legend on the back for the 0-5v and frequency based settings. It also features an easy to access integrated fuse and molded mounting tabs.

Simplified Wiring
AEM’s Water/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive.

Integrated Boost Safe Feature
The controllers in AEM’s Water Methanol systems include an integrated “Boost Safe” output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, “Boost Safe” can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water/Methanol Injection Systems.

Heavy-Duty High Pressure Injection Pump
AEM’s internally-bypassed water/methanol injection pump does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.

Low-Profile 1.15 Gallon Tank
AEM’s gas Water/Methanol Injection Systems are available with or without a compact 1.15 gallon tank that features an anti-starvation reservoir. A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris.

Machined Billet Injectors and Nozzles
AEM includes one precision-machined billet injector in its gasoline Water/Methanol Injection kit. It features an integral check valve to prevent unintended fluid flow. Three billet injector nozzles are included for matching water/methanol flow to an engine’s horsepower output (see graph below).

Revised Flow Control Strategy for More Linear Fluid Delivery
AEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water/methanol injection, which further optimizes charge air cooling and detonation control.

  • Multi-Input (0-5v/frequency) progressive controller design features large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off fluid solenoid
  • “Boost Safe” failsafe output included (for complete failsafe under all conditions, see our Water/Methanol Failsafe Device)
  • Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectable
  • Precision-machined billet-aluminum injector with integral check valve
  • Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min)
  • 1 gallon tank with integral conductive low-fluid sensor and positive lock connector (tank-less systems available)
  • 20 feet of injection tubing included
  • LED dash light for system status and low fluid warning
Your shopping cart is empty

Terms and conditions


Webstore owner and contact information:

Location: FINLAND

Protoparts Oy
Paypal: rsno.invest@elisanet.fi
VAT: FI28405755
Yrittäjäntie 7, 60800 Ilmajoki

+358-400-561 992 or +358-400-284 113
info@protoparts.fi
www.protoparts.fi
2840575-5

We sell products worldwide to private persons and businesses. Prices shown in shop is  included Finnish VAT 24% (Exception: some unique custom products, when it is separately mentioned). Right for price changes and delivery costs/methods are reserved for us.

NOTE! Customers outside EU: You don´t have to pay VAT, price is corrected at checkout procedure, when you have given your country!

Ordering

Ordering is processed by clicking product(s) to shopping cart and making paymentprocess in given methods (Klarna Checkout, Paypal). All personal information is considered confidential and it is only used in processing the order and contacting consernig the order(s), unless it is separately mentioned.

When placing an order, it is then assumed that you have read and understood all terms and conditions and you are accepting those current terms.

Payments and payment methods

Payment methods are: 

- Paypal (Credit- and debitcards and Paybal balance) 

- Postal office prepayment (only in Finland)

- Klarna Checkout, which includes: (only in Finland, Sweden, Norway, Germany)

*Invoice

*Partial payment

*Card payment

*Internet Bank transfer.

By giving your information at checkout, you accept Klarna AB:s (Klarna AB, Sveavägen 46, 111 34 Stockholm) terms and conditions. By pressing "Buy now" -buttona, you will accept also Protoparts terms and conditions.

Order- and payment confirmation

When we have received an order, we immediately send confirmation to you, which includes your order information. ALWAYS CHECK content of order confirmation and please make immediate contact to us, if you find something is wrong or you have questions. Save the confirmation if you come in need to contact us. When contacting, pleas tell us your Name, customer number (if available) and number of order. And when receiving delivery, please make sure that contents match with confirmation and receipt/invoice.

Contact information:

Protoparts Oy
Paypal: rsno.invest@elisanet.fi
VAT: FI28405755
Yrittäjäntie 7, 60800 Ilmajoki

+358-400-561 992 or +358-400-284 113
info@protoparts.fi
www.protoparts.fi
2840575-5

Delivery methods and -costs

Delivery costs includs postage and packin expenses. We show approximate sum of delivery costs in our webshop, which is via our reference method. Actual costs is found when you place and order and choose your preferred payment- and delivery method. Available methods are depending on product, weight, measures and receivers country. Shop only shows methods, which are possible for that current order.

Our current logistic partners are Finnish post "Posti" (International delivery also) and matkahuolto (Only in Finland). 

Maximum single package weight is 30kgs, after that it is special Multi package delivery and we contact for delivery price.

Customers outside European Union and customs declaration:

If your delivery address is outside of EU, you may have to pay import duties and taxes, which are assigned once a shipment reaches your country. You must meet any additional charges for customs clearance. Please note customs policies vary widely from country to country. We recommend you contact your local customs office for further information. International shipments may be subject to cross-border inspections by customs authorities. We are not responsible for customs declaration fees.

Customer outside EU can order Tax Free from us, Checkout will automatically reduce Finnish VAT off, so price will be 24% cheaper, than price, which includes VAT.

About reducing declared value to reduce customs fees:

Note that we cannot change the value of shipments in order to reduce customs duties. The modification of commercial invoice is brobhited by law and we kindly ask understanding: Please do not ask us to reduce shipping value. We will not do it.

 

Delivery times

Our most common delivery time inside Finland is approx 2-3 days from order, inside europe about a week, depending on Postal service. Mainly, stocked and ready items will be sent as soon as possible, about 24h from order. Ununusual delivery time is mentioned in product specs and if there is some delay from some reason, we will contact you via Email.

Please note: Ready Megasquirt ECUs and wiring harnesses almost every time needs some customization, so these are delivered within a week from order. Our expert will contact in this case.

Returns

Right of withdrawal

You have the right to cancel this agreement within 14 days without giving any reason. The withdrawal period ends within 14 days starting from the day you received the last shipment, or in the case of downloadable products, from the moment you received the order.

In order to exercise the right of withdrawal, you must notify us of your decision to cancel the agreement in an unambiguous way (for example, by mail or by email). You can also use our printable return form, but its use is not mandatory.

To comply with the deadline for withdrawal, it is sufficient that you submit your notice of cancellation before the end of the withdrawal period.

Effects of withdrawal

If you withdraw from this contract, we shall reimburse to you all payments received from you, including the costs of delivery (with the exception of the supplementary costs resulting from your choice of a type of delivery other than the least expensive type of standard delivery offered by us), without undue delay and in any event not later than 14 days from the day on which we are informed about your decision to withdraw from this contract. We will carry out such reimbursement using the same means of payment as you used for the initial transaction, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of such reimbursement.

You must return the goods without delay and no later than 14 days after informing us about your decision to withdraw from the contract. The deadline is met if you send back the goods before the period of 14 days has expired.

You are only responsible for the kind of value decrease of the goods that did not result from treatment that is required for determining the nature, properties and functionality of the goods.

Unpaid or undelivered package

Unpaying or no picking up delivery is NOT considered as legal return or cancellation. 

In this case we hold right to ask you for payment for delivery cost IN BOTH DIRECTIONS. Invoice is sent to receiver.

Problems in delivery

If delivery is lost or damaged in transit or somehow it is not what you expected, please meke contact. In that case, contact MUST be made within 14 days from receiving it. Contact must be made with email or letter. 

If the package is clearly damaged in transit, receiver must make an reservation/claim to transit company you have chosen to deliver.