Price 529,00 €
(Incl. VAT 24%)
This set is boost dependent for forced induction vehicles up to 35 PSI (2,4bar) of boost. The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup.
Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system.
Water/methanol injection for gas engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation on forced induction and high performance naturally aspirated race engines. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system.
The on-demand progressive controller in AEM’s Boost Dependent PN30-3300 Water/Methanol Injection kit bases injection flow on manifold pressure using an on-board MAP sensor (up to 35 PSI of boost) to ensure the proper amount of water/methanol injection at all points along an engine’s power curve.
AEM’s engineers spent extensive time developing the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water/methanol injection, which further optimizes charge air cooling and detonation control.
The new controller design features large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back, integrated fuse and molded mounting tabs.
AEM’s Boost Dependent Water/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive.
AEM’s Boost Dependent, PN 30-3300 gasoline Water/Methanol Injection System’s compact 1 gallon tank includes a high tech conductive low fluid level indicator with a positive lock connector and color matched wires to the wiring harness.
Yrittäjäntie 7, 60800 Ilmajoki
We sell products worldwide to private persons and businesses. Prices shown in shop is included Finnish VAT 24% (Exception: some unique custom products, when it is separately mentioned). Right for price changes and delivery costs/methods are reserved for us.
NOTE! Customers outside EU: You don´t have to pay VAT, price is corrected at checkout procedure, when you have given your country!
Ordering is processed by clicking product(s) to shopping cart and making paymentprocess in given methods (Klarna Checkout, Paypal). All personal information is considered confidential and it is only used in processing the order and contacting consernig the order(s), unless it is separately mentioned.
When placing an order, it is then assumed that you have read and understood all terms and conditions and you are accepting those current terms.
Payment methods are:
- Paypal (Credit- and debitcards and Paybal balance)
- Postal office prepayment (only in Finland)
- Klarna Checkout, which includes: (only in Finland, Sweden, Norway, Germany)
*Internet Bank transfer.
By giving your information at checkout, you accept Klarna AB:s (Klarna AB, Sveavägen 46, 111 34 Stockholm) terms and conditions. By pressing "Buy now" -buttona, you will accept also Protoparts terms and conditions.
When we have received an order, we immediately send confirmation to you, which includes your order information. ALWAYS CHECK content of order confirmation and please make immediate contact to us, if you find something is wrong or you have questions. Save the confirmation if you come in need to contact us. When contacting, pleas tell us your Name, customer number (if available) and number of order. And when receiving delivery, please make sure that contents match with confirmation and receipt/invoice.
Yrittäjäntie 7, 60800 Ilmajoki
Delivery costs includs postage and packin expenses. We show approximate sum of delivery costs in our webshop, which is via our reference method. Actual costs is found when you place and order and choose your preferred payment- and delivery method. Available methods are depending on product, weight, measures and receivers country. Shop only shows methods, which are possible for that current order.
Our current logistic partners are Finnish post "Posti" (International delivery also) and matkahuolto (Only in Finland).
Maximum single package weight is 30kgs, after that it is special Multi package delivery and we contact for delivery price.
If your delivery address is outside of EU, you may have to pay import duties and taxes, which are assigned once a shipment reaches your country. You must meet any additional charges for customs clearance. Please note customs policies vary widely from country to country. We recommend you contact your local customs office for further information. International shipments may be subject to cross-border inspections by customs authorities. We are not responsible for customs declaration fees.
Customer outside EU can order Tax Free from us, Checkout will automatically reduce Finnish VAT off, so price will be 24% cheaper, than price, which includes VAT.
Note that we cannot change the value of shipments in order to reduce customs duties. The modification of commercial invoice is brobhited by law and we kindly ask understanding: Please do not ask us to reduce shipping value. We will not do it.
Our most common delivery time inside Finland is approx 2-3 days from order, inside europe about a week, depending on Postal service. Mainly, stocked and ready items will be sent as soon as possible, about 24h from order. Ununusual delivery time is mentioned in product specs and if there is some delay from some reason, we will contact you via Email.
Please note: Ready Megasquirt ECUs and wiring harnesses almost every time needs some customization, so these are delivered within a week from order. Our expert will contact in this case.
You have the right to cancel this agreement within 14 days without giving any reason. The withdrawal period ends within 14 days starting from the day you received the last shipment, or in the case of downloadable products, from the moment you received the order.
In order to exercise the right of withdrawal, you must notify us of your decision to cancel the agreement in an unambiguous way (for example, by mail or by email). You can also use our printable return form, but its use is not mandatory.
To comply with the deadline for withdrawal, it is sufficient that you submit your notice of cancellation before the end of the withdrawal period.
You must return the goods without delay and no later than 14 days after informing us about your decision to withdraw from the contract. The deadline is met if you send back the goods before the period of 14 days has expired.
You are only responsible for the kind of value decrease of the goods that did not result from treatment that is required for determining the nature, properties and functionality of the goods.
Unpaying or no picking up delivery is NOT considered as legal return or cancellation.
In this case we hold right to ask you for payment for delivery cost IN BOTH DIRECTIONS. Invoice is sent to receiver.
If delivery is lost or damaged in transit or somehow it is not what you expected, please meke contact. In that case, contact MUST be made within 14 days from receiving it. Contact must be made with email or letter.
If the package is clearly damaged in transit, receiver must make an reservation/claim to transit company you have chosen to deliver.